Agilent Technologies N9360A, Руководство по программированию

Страница: 98 / 180

5-52 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
At start up of the Tester, the queries in
<int 1>
and
<int 2>
format are returned.
If the setting with
<int>
format is performed, the format of the
query changes to
<int>
format.
If the setting with
<int 1>
and
<int 2>
format is performed,
the format of the query returns to
<int 1>
and <int 2> format.
This query command returns the set Band and Frequency of
RFCH with real. The range of the value is same as that of the
command parameter.
BS Level
TESTs:MANual:AMPLitude <real>
TESTs:MANual:AMPLitude?
This command sets the amplitude (BS Level) of output signal
from the Tester. The allowable range is from
-110.0
to
-50.0
(dBm) in
0.1
step. At preset, this is set to
-50.0
(dBm).
This query command returns the set amplitude of output signal
with real. The range of the value is same as that of the command
parameter.
BS Call Type
TESTs:MANual:BSCType AMR|RMC
TESTs:MANual:BSCType?
This command selects a type of BS Call from
AMR
and
RMC
. At
preset, this is set to
AMR
.
This query command returns the set BS Call type.
Power Control Level
TESTs:MANual:PLEVel CNTUP|CNTDOWN|HOLD <<
<char>,<int>
This command sets the output level of the mobile phone with
Power Control (TPC) in the Stand-by status. The Power Control
is valid during the Connection status. The allowable range and
preset values are as follows: