Agilent Technologies N9360A, Руководство по программированию

Страница: 72 / 180

5-26 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
This command defines whether or not to include the Local
Update in a test flow. Setting
Lu1
executes Mobile Phone Power
On Location Update,
Lu2
executes BS Change Location Update
and
OFF
skips Location Update test. At preset, this is set to
LU1
in sequence 1 and
LU2
in sequence 2.
MS Call
CONFigure:SEQuence:SIGNaling:MSCAll ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:MSCAll?
This command sets whether or not to include the MS Call in a
test flow. The parameter is
ON
(1) for Run or
OFF
(0) for — (skip).
At preset, this is set to
1
.
This query command returns the setting of MS Call with integer
value of
1
or
0
. The meaning of the return value is same as that
of the command parameter.
Talk Test (MS Call)
CONFigure:SEQuence:SIGNaling:TALK ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:TALK?
This command sets whether or not to include the Talk step with
an AMR connection (MS Call) in a test flow. The parameter is
ON
(1) for Run or
OFF
(0) for — (skip). At preset, this is set to
1
.
This query command returns the setting of Talk test with
integer value of
1
or
0
. The meaning of the return value is same
as that of the command parameter.
BS Call (AMR)
CONFigure:SEQuence:SIGNaling:BSCAll:<<
AMR ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:BSCAll:AMR?
This command sets whether or not to include the BS Call (AMR)
in a test flow. The parameter is
ON
(1) for Run or
OFF
(0) for —
(skip). At preset, this is set to
1
.