Agilent Technologies N9360A, Руководство по программированию

Страница: 85 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-39
TESTs Subsystem for Automatic Test
This function allows you to execute the overall measurements
and pass or fail tests by the automatic test. Test sequence and
condition are configured by the
CONFigure:SEQuence
commands and
CONFigure:CONDition
commands.
Command Reference for Stand-by/Measuring Screens
The following commands are used to set the controls and
parameters associated with the initial test condition for the
[Stand-by] or [Measuring] screens. The query commands return
the settings of those controls and parameters.
Screen Mode
TESTs:AUTO:SCReen SIMPlified|DETailed|VALue
TESTs:AUTO:SCReen?
This command selects the screen mode. The parameter is
SIMPlified
,
DETailed
or
VALue
. At preset, this is set to
SIMP
.
This query command returns the selected screen mode by
strings of
SIMP
,
DET
or
VAL
.
Caller ID
TESTs:AUTO:CALLer:ID <string>
TESTs:AUTO:CALLer:ID?
This command sets the Caller ID on the [Stand-by] screen.
<string>:
Sets dialing number at BS call (AMR) test step. Up
to 20 digit arbitrary number (0 to 9) and symbol * or #. This is
not initialized by PRESET execution with the Starting Condition
softkey.
This query command returns the set Caller ID with string.
RFCH
TESTs:AUTO:VARiable:RFCH:CHANnel1 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel1?