Agilent Technologies N9360A, Руководство по программированию

Страница: 66 / 180

5-20 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
These query commands return the set Band and channel
number with integer. The range of the value is same as that of
the command.
Open Loop TX Power
CONFigure:SEQuence:OPENpower <int>
CONFigure:SEQuence:OPENpower?
This command sets whether or not to include Open Loop TX
Power test in the test sequence.
<int>
is
1
for Run or
0
for —
(skip). At preset, this is set to
1
.
Open Loop TX Power test can be executed only on
RFCH1
.
This query command returns the setting of the Open Loop TX
Power test with integer. The meaning of the return value is same
as that of the command parameter.
Inner Loop Power
CONFigure:SEQuence:INNErpower <int>
CONFigure:SEQuence:INNErpower?
This command defines whether or not to include Inner Loop
Power test in the test sequence.
<int>
is a sum of the values of
all the 6 bits as follows.
bit 0 (1): For testing RFCH1
bit 1 (2): For testing RFCH2
bit 2 (4): For testing RFCH3
bit 3 (8): For testing RFCH4
bit 4 (16): For testing RFCH5
Table 5-1 RFCH Allowable Range and Preset Value
Int Allowable Range Preset Value
CH1 CH2 CH3 CH4 CH5 CH6
1 –1 1 6 1 1 1 — — —
2 99999 9600 to 9900 812|837|4150 to 4200 9612 9750 9888 — — —