Agilent Technologies 4291B, Быстрый старт

Страница: 131 / 158

A
Manual Changes
Introduction
This appendix contains the information required to adapt this manual
to earlier versions or congurations of the analyzer than the current
printing date of this manual. The information in this manual applies
directly to the 4291B RF Impedance/Material Analyzer serial number
prex listed on the title page of this manual.
Manual Changes
T o adapt this manual to your 4291B , see T able A -1 and T able A -2 , and
make all the manual changes listed opposite your instrument's serial
number and rmware version.
Instruments manufactured after the printing of this manual may be
dierent from those documented in this manual. Later instrument
versions will be documented in a manual changes supplement that
will accompany the manual shipped with that instrument. If your
instrument's serial number is not listed on the title page of this
manual or in T able A -1, it may be documented in a yellow MANU AL
CHANGES supplement.
In additions to change information, the supplement may contain
information for correcting errors (Errata) in the manual. T o keep
this manual as current and accurate as possible , Agilent T echnologies
recommends that you periodically request the latest MANU AL
CHANGES supplement.
F or information concerning serial number prexes not listed on the
title page or in the MANU AL CHANGE supplement, contact the
nearest Agilent T echnologies oce .
Turn on the line switch or execute the *IDN? command by GPIB to
conrm the rmware version. See the GPIB Command R eference
manual for information on the *IDN? command.
T able A -1. Manual Changes by Serial Number
Serial Prex or Number Make Manual Changes
T able A -2. Manual Changes by Firmware V ersion
V ersion Make Manual Changes
Manual Changes A-1