Agilent Technologies 4284A, Руководство по эксплуатации

Страница: 378 / 460

T able 10-8.
Impedance Measurement Accuracy T est Limits
Setting T est Limits (R)
Signal
Lev el
T est
F requency
100 Standard 1 k Standard
*
510 mV 20 Hz C.V. 60.285 C.V. 62.81
125 Hz C.V. 60.112 C.V. 61.11
1 kHz C.V. 60.082 C.V. 60.81
12.5 kHz C.V. 60.132 C.V. 61.31
48 kHz C.V. 6O.132 C.V. 61.31
96 kHz C.V. 60.132 C.V. 61.31
1 MHz C.V. 60.154 C.V. 61.02
20 mV 20 Hz C.V. 60.691 C.V. 66.60
1 kHz C.V. 6O.191 C.V. 61.82
1 MHz C.V. 60.264 C.V. 62.06
5.1 V
**
20 Hz C.V. *0.284 C.V. 62.81
1 kHz C.V. 6O.131 C.V. 61.31
1 MHz C.V. 60.204 C.V. 61.52
C.V.: Standard's calibration v alue at DC.
*
1 k standard should b e measured on the 300 range.
**
Option 001 only
20. Connect the 1 m T est Leads (16048A) to the UNKNOWN
terminals.
21. Press the 4 MEAS SETUP 5 MENU k ey and the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CORRECTION softkey
to display the CORRECTION page.
22. Set the CABLE length selection switch to 1 m.
23. Store the OPEN CORRECTION data and the SHOR T
CORRECTION data referring to Steps 4 through 9. In this
pro cedure the OPEN termination and the SHOR T termination
should b e connected to the 1 m T est Leads (16048A).
24. Set the 4284A to the man ual trigger mo de.
25. Set the measuremen t function to Cp-D.
26. Connect the 1000 pF standard to the 1 m T est Leads (16048A)
27. P erform Step 28 through 29 for all the test frequencies listed in
T able 10-9.
28. Press the 4 TRIGGER 5 k ey .
10-16 P erformance T ests