manualshive.com logo in svg

Aerotech Ndrive HL, Руководство пользователя, Страница: 84 / 138

Поделиться
Скачать
Aerotech Ndrive HL Скачать руководство пользователя страница 84

Ndrive HL User’s Manual 

Options 

www.aerotech.com 4-17 

4.1.9.   

SSI Net (2 channel) (J302, J303) 

Each of the two SSI Net interfaces is a two-channel bidirectional RS-422 interface, most 
typically for quadrature encoders. This allows one channel for the sine signal and one 
channel for the cosine signal. Alternatively, one of the SSI Net interfaces may be used to 
provide an encoder marker signal to another SSI Net interface if used. Each of these two 
SSI Net interfaces are both available on the J302 and J303 connectors, as illustrated in 
the following table. Note that the J205 encoder channel may also be used as an 
input/output for multi-axis PSO firing. 

The SSI Net is designed for daisy-chaining encoder signals from one Ndrive HL to 
another for two/three-axis PSO (laser firing). This allows one Ndrive HL containing the 
–DUALPSO or –TRIPLEPSO options to track the vectorial position change of two/three 
axes in real-time. These encoder signals may also be used for user-defined purposes. 
Refer to Figure 4-17 and Figure 4-18. These four channels are bi-directional and 
configured via the PsoSsiConfig and PsoSsi2Config axis parameters; see the Nview help 
for more information. Note that SSI Net #1 is also available on the J301 connector (see 
Section 4.1.8.). The signals from these ports will be the same as the differential line 
driver encoder signal input to the Ndrive HL, unless the –MXH option is present. The 
signal output, when the –MXH option is present, will be of a pulse width determined by 
the –MXH clock frequency, as indicated in Table 3-17.  

 

SSI Net #1 and #2 interfaces are both physically 
hardwired to the J302 AND J303 connectors. If SSI Net #1 
is configured as an input, a signal driven into the SSI Net 
#1 connections on J302, will also be present on the SSI 
Net #1 connections of J303, effectively making SSI Net #1 
on J303 an (un-buffered) output of this same signal. 
Likewise, this would also be true for the SSI Net #2 
interface. 

Table 4-15. 

J302, J303 2-Channel SSI Net Connector Pin Assignment 

Pin # 

Label 

Description 

In/Out/Bidirectional 

1 

Sin-N 

SSI Net #1 Sin-N 

Bidirectional 

2 

Sin 

SSI Net #1 Sin 

Bidirectional 

3 

Cosine-N 

SSI Net #2 Cosine-N / Marker-N 

Bidirectional 

4 

Sin-N 

SSI Net #2 Sin-N 

Bidirectional 

5 

Sin 

SSI Net #2 Sin 

Bidirectional 

6 

Cosine 

SSI Net #2 Cosine / Marker 

Bidirectional 

7 

Cosine-N 

SSI Net #1 Cosine-N / Marker-N 

Bidirectional 

8 

Cosine 

SSI Net #1 Cosine / Marker 

Bidirectional 

 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание Ndrive HL











































































































































Отзывы:

Нет отзывов