manualshive.com logo in svg

AEG THYRO-A, Руководство по эксплуатации

Поделиться
Скачать
AEG THYRO-A Скачать руководство пользователя страница 7

7

EN

1. General

The Thyro-A is a communication-capable thyristor power controller. 
It can be used wherever alternating voltages, alternating currents or 
outputs in thermal process technology need to be controlled. The 
Thyro-A has several different control and regulation modes, can 
easily be connected to process and automation technology, has a 
high degree of control accuracy and is simple to handle.
These operating instructions describe the configuration and functions 
of the Thyro-A and are designed to enable qualified personnel to per-
form the following work:
• planning
• commissioning
• maintenance and repair

1.1   Type designations / Validity

These operating instructions describe the Thyro-A series versions 
...H 1, H RL1 and ...H RLP1. Product characteristics that are only 
provided by the Thyro-A ...H RL1 and ...H RLP1 series are marked 
in the text.
These operating instructions comply with the current technical speci-
fications of the device at the time of publication. The contents do not 
constitute a subject matter of the contract, but serve for information 
purposes only.
We reserve the right to alter any specifications given in these opera-
ting instructions, especially with regard to technical data, operation, 
weights and dimensions. AEG PS reserves the right to make modifi-
cations with regard to the content and technical data in these opera-
ting instructions.

Содержание THYRO-A













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды