manualshive.com logo in svg

AEG THYRO-A, Руководство по эксплуатации

Поделиться
Скачать
AEG THYRO-A Скачать руководство пользователя страница 11

11

EN

•  Connection for optional visualization and commissioning software 

Thyro-Tool Family (via PC-Interface RS232)

Options:
•   Connection to various bus systems, e.g. Profibus DPV1, Modbus 

RTU) DeviceNet, CANopen, ProfiNet.
Other bus systems on request.

•   PC-Interface and THYRO-TOOL FAMILY (visualization and 

commissioning software)

1.4   Warranty

In the event of any claims in connection with the Thyro-A, please 
contact us quoting:
• type designation
• fabrication number / Serial number
• reason for the complaint
• environmental conditions of the device
• operating mode
• period of use
Goods and services are subject to the general conditions of supply for 
products of the electrical industry, and our general sales conditions. 
Claims in connection with supplied goods must be submitted within 
one week of receipt, along with the delivery note. AEG PS will rescind 
all obligations such as warranty agreements, service contracts, etc. 
entered into by AEG PS or its representatives without prior notice 
if maintenance and repair work is carried out using anything other 
than original AEG PS spare parts or spare parts purchased from 
AEG PS.

Содержание THYRO-A













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды