manualshive.com logo in svg

AEG THYRO-A, Руководство по эксплуатации

Поделиться
Скачать
AEG THYRO-A Скачать руководство пользователя страница 41

41

EN

For device configuration, there is a 10-pin DIP switch behind the cover of 
the master power unit. The DIP switch is only read in once by the control 
device at switch-on or when the mains returns. Before commissioning, the 
DIP switch must be set to suit the application.
•  Switch off mains supply and secure against accidentally being switched 

back on.

• Remove the cover of the master power unit.
• Set configuration on the DIP switch.
The settings that can be made with the individual switches are described in 
the following chapters.

4.2.1   Operating mode and load types 

Thyro-A 1A and Thyro-A 2A

Thyro-A 3A

4.2.2  Control mode / Analog output

The highest value of the load voltage or load current is always used 
for control and display. The total power is used for power control. If a 
bus module or PC is connected, control mode and analog output can 
be set separately, e.g. U control with I display.

 

S1.1 

S1.2 

Load type and load connection

 

OFF 

OFF 

VAR, with open delta

 

ON 

OFF 

TAKT, with delta or star without neutral conductor

 

OFF* 

ON* 

VAR, with delta or star without neutral conductor

 

ON 

ON 

VAR, with star with neutral conductor

 

Can be set with  

TAKT, with delta or star with neutral conductor

  THYRO-TOOL FAMILY  

TAKT, with open delta

* Default setting

 S1.1 

S1.2 

Operating 

mode

 

OFF OFF 

None

 

ON 

OFF 

TAKT - Full wave switch principle

 

OFF 

ON 

VAR - Phase-angle principle

 

ON 

ON 

QTM - Half wave switch principle (Quick takt mode)

Содержание THYRO-A













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды