Advantech EKI-7659C, Руководство пользователя

Страница: 122 / 147

EKI-7659C User Manual 110
C.2 Port
C.2.1 Port Statistics
The following information provides the current port statistic information.
•
Port:
The port number.
•
Type:
Displays the current speed of connection to the port.
•
Link:
The status of linking—‘Up’ or ‘Down’.
•
State:
It’s set by Port Control. When the state is disabled, the port will not transmit or
receive any packet.
•
Tx Good Packet:
The counts of transmitting good packets via this port.
•
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less
than 64 octets], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
•
Rx Good Packet:
The counts of receiving good packets via this port.
•
Rx Bad Packet:
The counts of receiving good packets (including undersize [less
than 64 octets], oversize, CRC error, fragments and jabbers) via this port.
•
Tx Abort Packet:
The aborted packet while transmitting.
•
Packet Collision:
The counts of collision packet.
•
Packet Dropped:
The counts of dropped packet.
•
Rx Bcast Packet:
The counts of broadcast packet.
•
Rx Mcast Packet:
The counts of multicast packet.
• Click ‘Clear button to clear the information.
Figure C.32: Port Statistics
C.2.2 Port Control
In Port control, you can view every port status that depends on user setting and the
negotiation result.
•
Port No.:
select the port that you want to configure.
•
State:
current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
•
Speed/Duplex:
set the port link speed.
•
Duplex:
set full-duplex or half-duplex mode of the port.
•
Flow Control:
set flow control function is Symmetric or Asymmetric in Full Duplex