71
Turn the backlighting lamp for abot 90° clockwise (1).
Take the lamp out of lampholder (2).
To replace the starter, turn starter for about 90° counter clockwise. (3).
Remove the starter (4).
Put the new starter into the holder (1).
Turn the new starter clockwise for about 90° (2).
If necessary, clean the backlighting lamp with a clean, soft leather cloth
damped with glass cleaner or clean water.
Put the backlighting lamp into the lampholder (3).
Turn the backlighting lamp for about 90° counter clockwise (4).
– The backlighting lamp snaps into the holder. Make sure that the stamp
on the lamp points to the viewer.
Remove the top canopy support.
Push the top canopy cover into the front profile groove. Keep top canopy
cover in this position.
Push holding bolts into position again.
