19
Unpacking the unit and accessories
CAUTION!
Heavy load, risk of injuries
Carrying the heavy components of the sunbed can cause overstrain and
lead to health risks.
Always carry the heavy components with four (4) persons.
Move the unit on the pallet to the site of installation. Observe
instructions provided in the chapter
Transport
.
Remove the stretch tape.
- Cut stretch tape on the sides.
Lift the two boxes loaded on top of the box. Store boxes for further use.
Remove the cardboard panels on the sides
- Loosen and remove the clipses on the cardboard panels.
- Remove the cardboard panels
- Store cardboard panels in such a way that they don’t hinder
further assembly work.
Remove loose packing material.
Take out the boxes with accessories inside the sunbed.
- Store boxes in such a way that they don’t hinder further
assembly work.
The box which contains the manual is marked. Take out the manual.
Remove loose packing material and foils.
- Collect packing material for disposal in compliance with
applicable environmental standards.
Do not remove the protective foil for the time being in order to prevent
damages and scratches.
Remove the wooden boards.
- Loosen the wooden top board
- Remove the wooden top board
- Loosen the wooden boards on the sides.
- Remove the wooden boards on the sides.
- Store the wooden boards in such a way that they don’t
hinder further assembly work.
For the time being, allow the sunbed to remain on the pallet.
