69
Replacement of backlighting lamps
The lamps for the backlighting must be replaced whenever they become
defective or fail.
Backlighting sunbed bench
The backlighting lamp for the backlighting of the sunbed is installed behind
the front cover.To replace the lamp the front cover must be removed.
Proceed as follows:
Disconnect the unit from the mains supply with the mains disconnection
switch and secure with lock and key against accidental reconnection.
Get a soft support ready for storage of the front cover.
Loosen the two screws at the front cover.
Lightly lift the front cover.
Pull the brackets out of the slots in the bench.
Store the front cover.
The backlighting lamp is now accessible and the lamp can be replaced.
Turn the backlighting lamp clockwise for about 90°(1.).
Take the backlighting lamp out of the lampholder (2.).
To replace the starter, turn starter counter clockwise for about 90° (3.).
Remove the starter (4.).
