58
Installation of UV-lamps in the sunbed
Clean the lamps with a soft leather cloth slightly damped in glass
cleaner or clear water.
Put the UV lamps into the lampholder (3.).
Turn the lamp clockwise by 90° (4.)and make sure that the lamp stamp
is clearly visible to the viewer.
– The UV-lamp snaps into the lampholder with a „click“.
After all sunbed UV-lamps have been installed, re-assemble the AC
acrylic.
Lift the sunbed acrylic for a few centimeters..
Put the acrylic support back into its place.
Let the sunbed acrylic down onto the sunbed.
Replacement of starters
Starters must be replace whenever lamps start to flicker or do not light up.
Disconnect the unit from the mains supply by turning off the the mains
disconnection switch and secure with lock and key against accidental
re-connection.
Survey UV-lamps and starters
1
UV-lamp
2
lampholder
3
starter
Disassembly of starter
If you need to replace a starter, proceed as follows:
Turn off the mains disconnection switch and secure with lock and key
against accidental reconnection.
Take the UV-lamp out of the lampholder.
Turn the starter by 90° counter clockwise (2).
Take out the starter(1).