63
Replacement of HID lamps and facial filter glasses
The HID lamps are installed in the facial cassettes
top canopy (3 HID lamps)
rear column (1 HID lamp)
Each HID lamp is covered with a facial filter. In order to replace a HID lamps
this facial filter must be disasembled first.
The HID lamps in the facial cassettes must be replaced whenever they
become defective or when recommended useful lifetime has expired.
The facial filters must be replaced whenever they are damaged or broken.
WARNING!
RISK OF BURNS! Hot surfaces and components!
Do not replace HID lamps immediately after a tanning session. Allow lamps and
components to cool down completely prior to starting any maintenance work.
NOTICE:
Only replace HID lamps with lamps of the same type and
wattage. Refer to specifications on the type label!
Disconnect the uit from the mains supply system with the mains
disconnection switch and secure with lock and key against accidental
reconnection.
In order to disassemble the facial filters you must disassemble the top
canopy acrylic and the side acrylic and cover profiles first.
Disassemble the top canopy acrylic as described in the chapter
Disassembly of top canopy acrylic
Disassemble the side colum acrylic as described unter
Disassembly of
side column acrylic
.
