41
Assembly of sunbed acrylic
The sunbed acrylic rests in a profile groove in the front and rear side and
acrros its whole length. Two sash locks secure the sunbed acrylic against
unauthorized removal. The sash locks are opened with the help of an
Allan key (6mm). A afety switch controls the installation and position of the
sunbed acrylic.
Two (2) persons are necessary to assemble the sunbed acrylic.
The two sash locks must be open.
To open the sash locks: turn clockwise by 90°.
Lift the sunbed acrylic with the two sash locks pointing to the side.
Position the sunbed acrylic across the rear edge of the sunbed profile.
Lower the sunbed acrylic into the front profile groove.
- At the footend side the acrylic is slightly lifted up by the
safety switch.
Push the sunbed acrylic backwards into the rear groove. This provides
enough tolerance space to the let the sunbed acrylic down into the front
profile groove.
At the headend, push the acrylic down.
Keep the acrylic in this position.
