43
Prior to first starting the sunbed, check if all set-ups are correct and all safety features are in place, for
example:
sunbed acrylic
top canopy acrylic
facial filters
on-site exhaust air system
sufficient fresh air supply of min. 1300 cfm, for instance, a big window or
a fresh air shaft.
functioning of the emergency stop button
Set-up of electronic controls
CAUTION!
Incorrect set-ups of the electronic control system can damage the unit.
Only authorized service personnel is allowed to perform the following jobs.
Via the control panel you have access to the operator’s menue. In the
operator menu you can read out total operating hours, select the set-ups
for operating hours of low-and highpressure lamps, as well as choose other
customized set-ups for operating the sunbed.
NOTICE:
Set-ups can only be accessed or modified when the unit is in
stand-by mode.
Turn the mains disconnection switch into position “I”.
Push the following sequence of buttons:
– “Cooling top canopy”,
– “Facials”,
– “Cooling top canopy”,
– “AC unit”,
– “AC unit”.
In order to get to a certain point in the menue, push the button “Music”
until you have reached the required menu point.
In order to change a value in the menu point, push the button “+” to
increase, or “–” to diminish.
First Start-up