manualshive.com logo in svg

Advanced Instruments OsmoTECH XT, Руководство пользователя

Поделиться
Скачать
Advanced Instruments OsmoTECH XT Скачать руководство пользователя страница 54

 

Chapter 4 

Testing samples

55

OsmoTECH XT Single-Sample Micro-Osmometer User Guide

Test results are stored in the Results database.

NOTE: 

If you want to cancel a test, you can 
withdraw the sample operating cradle at any 
time. If an error occurs during a test, you will 
hear a beep, and a message displays on the 
screen.

Preparing the instrument for the next test

1. 

Withdraw the operating cradle and remove the 
sampler from the cradle.

2. 

Grasp the sampler tip and depress the plunger to help 
remove it. Discard the sampler tip. 

3. 

Wipe the plunger tip with a soft, non-lint, non-ionic 
paper, being careful not to dislodge the Teflon® tip. 

4. 

Insert a clean, dry chamber cleaner into the sample 
port until you feel a positive stop. Rotate four or five 
times in one direction while applying forward 
pressure.

5. 

Withdraw the cleaner and use the other end to clean 
the probe again in the same manner.

Leave the cleaner in the sample port until the next 
test.

NOTE: 

If you want to confirm that you cleaned the 
instrument correctly, remove the cleaner and 
inspect it. Each end of the cleaner should 
have a small puncture hole, indicating proper 
cleaning. If you have finished testing samples 
for the time being, insert the cleaner back 
into the port after inspecting it.

6. 

Test more samples or exit:

• 

To test additional samples

, repeat this procedure 

beginning with step 

4 on pg. 53

.

• 

If you have no more samples to test

 

and

 if you are 

logged into the instrument, press the 

Login

 button 

to log out. Confirm that the Login button changes 
from blue to gray or orange.

4.6  Scanning barcodes 

You can scan the barcodes on samples. This eliminates 
entry errors and speeds the logging process. 

1. 

Make sure you’ve enabled the barcode  
(see 

Turning on the barcode scanner

)

.

2. 

Hold the control with its label positioned a few inches 
in front of the barcode scanner. 

The scanner reads the barcode and populates the ID 
and Control Name fields on the CONTROLS screen.

Supported barcode formats

• 

Code 39

• 

Interleaved

• 

Code 128

• 

PDF417

• 

ECC

• 

MSI

• 

UPC

• 

QR

• 

GS1

• 

IATA

• 

Codabar

• 

MaxiCode

• 

Code 93

• 

Aztec

• 

Code 11

• 

EAN

Содержание OsmoTECH XT


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды