Advanced Instruments OsmoTECH XT Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 97

Advanced Instruments OsmoTECH XT Скачать руководство пользователя страница 94

95

OsmoTECH XT Single-Sample Micro-Osmometer User Guide

Appendix F

Appendix K:

Warranty and warranty

duties

By accepting and operating this instrument, the user and Advanced Instruments agree to the following responsibilities
which constitute contractual warranties and conditions between the seller and the user for the maximum benefit and
usefulness of the instrument.

Advanced Instruments warrants that for 12 months from

date of shipment, each new product sold or

manufactured is free from defects in material and

workmanship under normal installation, use and service.

Advanced Instruments agrees that such defects will be

remedied or new parts furnished in exchange for any

defective part delivered by the owner, transportation

charges prepaid, to the factory for our examination. If,

in our judgment, the part contains any such defect it

will be replaced, charging only for transportation.

This warranty does not extend to any instrument

subjected to negligence, accident, abuse, misuse or

other improper operation, or which has been tampered

with, altered or repaired by anyone other than

Advanced Instruments or its authorized service

representatives. Nor does this warranty extend to any

consequential damages caused by defects or improper

use, or secondary damage resulting from prior

problems.

The above provisions do not extend the original

warranty period of any instrument or part thereof

which has been replaced or repaired thereunder.

Remedies made under the terms of this warranty in no

case include any obligation or responsibility for

transportation charges or arrangements.

All results, calibrations, effectiveness checks and

interpretations are the responsibility of the user.

THIS WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, REPRESENTATIONS AND CONDITIONS

OF ANY KIND, EXPRESSED OR IMPLIED IN FACT OR BY

LAW. IN NO EVENT SHALL ADVANCED INSTRUMENTS

BE LIABLE UNDER THIS WARRANTY OR OTHERWISE IN

ANY MATTER FOR ANY REMOTE OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE BREACH OF THIS

WARRANTY OR CONDITION IMPLIED BY LAW OR

OTHERWISE, OR FOR ANY DAMAGE TO THE

INSTRUMENT OR ANY PART THEREOF CAUSED BY

IMPROPER INSTALLATION, UNAUTHORIZED REPAIR OR

ALTERATION, NEGLIGENCE, ABUSE OR MISUSE

INCLUDING USE OF IMPROPER GLASSWARE OR

REAGENTS, ACCIDENT, OR ACT OF GOD.

Attention is called to the user’s responsibility regarding

reasonable use, useful life of the instrument and

immediate notification of accident outlined in the

warranty duties section of the user guide and/or

service manual.

No person is authorized to assume for us any other

liability in connection with the sale or service of

this equipment.

Advanced Instruments reserves the right, at any time

without notice, to make changes in price, color, material,

specifications and models without incurring liability to

modify products previously produced, and to add or

discontinue models and accessories.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

Al1YW REV 0

LIMITED WARRANTY CONDITIONS

MODEL NUMBER: _____________
SERIAL NUMBER: _____________
INSTALLATION DATE:

_____________

«
...
92
93
94
95
96
...
»

Содержание OsmoTECH XT


































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды