Advance acoustic SC3000 26" Disc, Руководство по обслуживанию

Страница: 22 / 70

BRUSHING SYSTEM
ENGLISH
SERVICE MANUAL
20 9099052000 SC3000 26” Disc
BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT
Check
Remove the brush/pad-holder deck. 1.
Remove dust and dirt from the motor carbon brush support area (A). 2.
Disengage the fasteners (B) and (C), then remove the four carbon brush supports (A). If necessary, disconnect the electrical 3.
connections (D).
Check the carbon brushes (E) for wear. Replace the carbon brushes when: the contact with the motor armature is insufficient, 4.
the carbon brushes are worn, the carbon brush contact surface is not integral, the thrust spring is broken, etc.
If necessary, disconnect the connections (F) and remove the carbon brushes with their supports (A) and replace them. 5.
Replace the carbon brushes as an assembly.
Reset
Assemble the components in the reverse order of disassembly, and note the following: 6.
When connecting the terminals (F), take care of their insulation from the surrounding parts of the frame. •
S301327A
A2 ENGLISH(2).indd 20 29/07/2011 17.02.51