Adobe 25510629 - After Effects CS3 Professional, Руководство пользователя

Страница: 125 / 130

Symptoms and solutions 125
2.
When the status bar near the lower-left corner of the dialog box disappears, click the Save
All Information button. The Save As dialog box appears.
3.
Specify a location and file name, and then click the Save button.
4.
Locate and open the resulting file, and copy and paste its contents into your message.
StatusLog.txt file
To troubleshoot some problems, you may also be asked to provide Technical Support with the
contents of the StatusLog.txt file. Each time Ultra starts, it makes a list in this file of each
component in your system that it attempts to initialize. If startup fails when it reaches a
particular component, the cause of the failure may be indicated by the last entry in this file.
The problem can sometimes be resolved by updating that component’s driver.
The StatusLog.txt file is located here:
Windows XP: C:\Documents and Settings\[ user name ]\Local Settings\Application
Data\Adobe\Adobe Ultra CS3
Windows Vista: C:\Users\[ user name ]\AppData\Local\Adobe\Adobe Ultra CS3
Symptoms and solutions
Symptom Solution
When I click the Set Key button,
the subject becomes a ghost,
similar to the following image: The subject was in the frame when you clicked the Set Key
button. To recover, either drag the preview slider to a clear
reference frame (with only the color screen background
showing) and click the Set Key button again, or use one of
the Key Point methods. For more information, see
“Setting
Key Points (Apply Points Method)” on page 79 .
When I play a session in the
Output Preview Monitor or save
an output movie, the session
continues after the input clip
ends. There is a video clip in another layer that either has a longer
overall duration than the input clip or has the Offset Into
Scene value set so that it continues playing after the input
clip ends. Ultra continues playing until it reaches the end of
last clip playing.
Identify which clips continue playing after the input clip
ends, and trim them to end at the same time as the input
clip.