adept technology SmartFleet EX, Руководство пользователя

Страница: 40 / 54

Chapter 5: Operation
Figure 5-2. Fully-automated Queueing Cycle
Queueing Parameters
There are various parameters that need to be set to specify how the Adept Enterprise Manager
handles queued requests. Most of these are set from within the MobileEyese software. See the
Adept Motivity User's Guide for information on using the MobileEyes software.
Access these parameters from:
MobileEyes > Tools > Central Configuration > Queuing Manager
The parameters that control the way that the Adept Enterprise Manager handles queueing are:
l
IdleTimeUntilResume
Number of minutes to wait, after a robot becomes available, before automatically resum-
ing an interrupted job.
If a robot has just booted up, or has been operated manually, then this is the number of
minutes that the queueing manager will wait before assigning any new jobs to this
robot. This can be a decimal number of minutes (i.e. 0.1 minutes is 6 seconds).
The queueing manager will not interrupt a robot active on a job.
Adept SmartFleet EX User’s Guide, Rev. A
Page 40 of 54