adept technology SmartFleet EX, Руководство пользователя

Страница: 35 / 54

Adept SmartFleet EX User’s Guide, Rev. A
Page 35 of 54
Chapter 5: Operation
This chapter describes how to operate the Adept Enterprise Manager and Adept Fleet Man-
ager. Before proceeding, you need to have performed the steps covered in the Installation and
Configuration chapters.
5.1 Turning Power ON and OFF
The Adept SmartFleet EX does not have a shutdown sequence, you can simply turn it on and
off as needed. Expect a 1 to 2 minute boot time.
Reaction to a Power Failure
The queue will be saved and automatically recovered in the event of power failure.
The Adept SmartFleet EX will automatically return to the power-state that it was in prior to a
power failure. If the unit is already off when the power loss occurs, it will remain off even
when power is restored. If the unit is on when the power fails, it will boot when power is
restored.
This feature is enabled by default, but can be changed in the BIOS. In rare cases, this feature
may get disabled by a CMOS battery failure.
5.2 Updating ARAM
If you have a valid aramcentral.tgz file, you can update the ARAM version on the Adept Smart-
Fleet EX appliance from within SetNetGo. For an updated ARAM package, contact Adept.
To update the ARAM package:
1. Open SetNetGo. (For details, refer to Connecting to SetNetGo on page 28.)
2. Click on the
Configuration > ARAM link from the menu on the left side of the SetNetGo
window.
The SetNetGo screen is displayed, with the ARAM section open.
3. Use the scroll bar to scroll the window down until the
ARAM Version screen is dis-
played.
4. Click
Browse to access the directory where the update file is located.
5. Click
Upload to upload the ARAM package to the Adept SmartFleet EX.
Starting and Stopping ARAM
Some changes made to the Adept SmartFleet EX will cause ARAM to be automatically stopped
and restarted. However, you can force ARAM to stop or start through SetNetGo, if needed.
1. Scroll the SetNetGo window down (starting at UpdateARAM Version) until the
Start/Stop ARAM screen is displayed.
2. Click
Start ARAM or Stop ARAM .