adept technology SmartFleet EX, Руководство пользователя

Страница: 29 / 54

Chapter 4: Configuration
1. Select Networking > Wired Aux Ethernet .
The Onboard Ethernet Settings screen is displayed:
Figure 4-2. Onboard Ethernet Screen
2. Select the
Server Mode radio button under the IP Settings.
3. Enter a valid, available IP address for the Adept SmartFleet EX in the
IP Address field.
Do not use the IP address: 1.2.3.4, because this would create a conflict with the IP
address permanently set for the Maintenance Ethernet port.
4. Enter the appropriate subnet mask for a host on your network in the Netmask field.
5. Enter the IP address of the default
Gateway . (This is the IP address of the device used to
connect to your network, typically a router.)
6. Click
Apply .
Adept SmartFleet EX User’s Guide, Rev. A
Page 29 of 54