Additel 761A, Руководство пользователя

Страница: 82 / 151

62

If disabled, this function is invalid. The setting will be stored by the calibrator and still effective after reboot.

If enabled, the target value of pressure control of the calibrator is restricted by this condition. When exceeding
this condition, the calibrator will give a prompt that the set point limit is enabled and the designated pressure cannot be out
puted.
4.2 Communication
The calibrator supports three communication modes: Ethernet, Wi-Fi and Bluetooth (BLE).
4.2.1 Ethernet
The calibrator is connected via network cables to computers for communication.
Table 4-1 Network connecting
Item Effective value Description
Address acquisition
DHCP/static Select the acquisition mode of device address.

When the DHCP mode is selected, the content of the table below will be allocated by the system automatically
and are read-only items.

When the static mode is selected, the following table needs to be completed manually.
Table 4-2 static mode selection