manualshive.com logo in svg

Ada HTR-2400, Инструкция по установке и эксплуатации

Поделиться
Скачать
Ada HTR-2400 Скачать руководство пользователя страница 14

Operation Instructions

Page 12

HTR-2400 Manual

+

-

SELECT

MENU

OFF

F

RONT

 P

ANEL

 C

ONTROL

The HTR-2400’s easy to use front panel permits
you to control the entire home. The buttons flank-
ing the LCD display are source transport func-
tions (source control).  How these operate will
depend on how your custom installation profes-
sional programmed the HTR-2400’s infrared
learner (IRL).  Because the two tuners are inter-
nal to the HTR-2400 and are not controlled by
the IRL, their operation is explained below.

To the left of the color LCD display
are numeric source transport but-
tons including * and Enter.  There is
also the black Master Power switch
located to the far left of the bezel.

The right side of the display fea-
tures additional source transport
buttons including play, stop,
pause, reverse play, forward, re-
wind and navigation buttons.

The Master Power switch needs to be pushed in for the HTR-2400 to operate.  When servic-
ing the system, it is wise to turn this button off.  Turning the button off is similar to unplugging
the HTR-2400.

XM Radio Tuner Operation (Also on keypads)

0-9 & ENTER - Access XM channel numbers.
* - Updates the current channel & song info.
<< & >> - Advances channels down & up.
< & > - Advances through XM genres.
|| & [] - Advances through channels in a genre.
MAIN - Advances through presets (preset skip up).
Up & Down - Preset skips up and down.

Storing An XM Station As A Preset

When on a station that you wish to store as a preset,
press 0 twice and then press ENTER.  You will be
prompted to “STORE? PR #”.  If this preset number is
right, press ENTER to store this as one of the 30 pos-
sible presets.

If you wish to store this station on a different preset
number, use < or > to cycle through other presets and
then press ENTER when you are ready to store the
station as a preset.  A * appearing next to the preset
number indicates that the preset is already being used.
If you press ENTER while on a preset number with a *
next to it, then the new station will override the previ-
ous one.

FM/AM/WX Tuner Operation (Also on keypads)

0-9, * & ENTER - Access presets (1-30) or direct tunes
stations by frequency (1027 or 102*7 enters 102.7).
<< & >> - Tunes down & up.
< & > - Seeks down & up.
[] - Switches between stereo & mono modes (FM only).
|| - Switches between radio bands (FM>WX>AM>FM).
MAIN - Advances through presets (preset skip).
Up & Down - Preset skips up and down.

Storing An XM Station As A Preset

When on a station that you wish to store as a preset,
press 0 twice and then press ENTER.  You will be
prompted to “STORE? PR #”.  If this preset number is
right, press ENTER.  If you wish to store this station
on a different preset number, use < or > to cycle through
other presets and then press ENTER.  A * appearing
next to the preset number indicates that the preset is
already being used.  If you press ENTER while on a
preset number with a * next to it, then the new station
will override the previous one.  You will then have the
option to label (4 characters) the station (i.e. NEWS,
ROCK, WABC, etc).  To skip this just hit ENTER again.
Or use the < & > buttons to change characters along
with the << & >> buttons to move the flashing charac-
ter position.  When done hit ENTER.

There are LCD adjustment buttons above the display.

Содержание HTR-2400



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды