Connections - Rear Panel
Page 8
HTR-2400 Manual
M
ULTI
-R
OOM
S
PEAKER
& V
IDEO
O
UTPUTS
+ - - +
L
R
Room 1
(8 - 2 )
+ - - +
L
R
Room 2
(8 - 2 )
+ - - +
L
R
Room 3
(8 - 2 )
+ - - +
L
R
Room 4
(8 - 2 )
+ - - +
L
R
Room 5
(8 - 2 )
+ - - +
L
R
Room 6
(8 - 2 )
+ - - +
L
R
Room 7
(8 - 2 )
+ - - +
L
R
Room 8
(8 - 2 )
RM 1 RM 2 RM 3 RM 4 RM 5 RM 6 RM 7 RM 8
DO NOT SHORT GROUNDS!
DO NOT SHORT SPEAKER!
DO NOT BRIDGE CHANNELS!
STABLE TO 2 OHMS!
GROUND (-) FOR LEFT AND RIGHT
CHANNELS ARE INDEPENDENT.
Component Video Output
Y
P
B
P
R
Component Video Input 2
Component Video Input 1
Y
P
B
P
R
Component Video Input 3
Y
P
B
P
R
Y
P
B
P
R
Video
In
Video
Out
Source 2
Source 4
Source 6
Source 8
Source 1
Source 3
Source 5
Source 7
Room 5
Room 7
Room 3
Room 1 &
Theater
Room 8
Room 6
Room 4
Room 2
S-Vide
2
1
ROOM 2
ROOM 6
ROOM 1 / HOME THEATER
ROOM 7
ROOM 4
ROOM 8
ROOM 3
ROOM 5
The HTR-2400 provides class D (digital) power
amplification for the eight rooms in the house.
Each zone output is stable down to 2 Ohms but
best performance will be achieved when operat-
ing speaker loads in the 8-4 Ohm range. The
room amplifier channels are bridged. This means
that the ground (-) is unique to the left and right
channels. You cannot short the grounds together
because they are not common. Because of the
close proximity of all speaker outputs, pay close
attention to cleanly terminate speaker wires.
Each zone also has a composite video
output. These can be used to provide
video to local TVs or video capable
touch-screens.
Room 1 shares its video output with
Home Theater zone. If any of the Home
Theater sources have their composite
video active (set to ON), even if that
source is not selected, then as Room 1 selects a source, video will not follow. However if the
Home Theater is only being driven by S-Video or component video and all home theater
sources have composite video set to OFF, then when an input is selected for Room 1, the
video will follow. This feature permits you to determine if Room 1 is a video capable zone or
not. For a flexible Home Theater setup, ADA suggests assigning Room 1 to a zone that does
not have a video display.
T
HEATER
S
PEAKER
, A
UDIO
& V
IDEO
O
UTPUTS
Home
Theater
Amplified
Audio
Output
7.1 Channels
All Ouputs
8 - 4
Do Not
Short
Outputs!
Do Not
Bridge
Outputs!
Front
Left
+
-
Surround
Left
-
+
Center
+
-
Surround Back
Left
Front Right
Surround Right
Subwoofer
Surround Back Right
-
+
+
-
-
+
+
-
-
+
SURROUND BACK LEFT
CENTER
FRONT LEFT
SURROUND LEFT
SUBWOOFER
SURROUND BACK RIGHT
SURROUND RIGHT
FRONT RIGHT
DO NOT SHORT SPEAKERS & BRIDGE CHANNELS!
STABLE TO 4 or 2 OHMS BASED ON SIDE PANEL
AMPLIFIER IMPEDANCE SWITCH POSITION.
The HTR-2400 features a Class A/B high-
current power amplifier for the Home The-
ater zone. This amplifier is stable to 4 Ohms.
Do not attempt to bridge this amplifier. If
you are using active subwoofers and/or are
not using back surround speakers, you can
leave these speaker channels unused.
Make certain that your speaker connections
are clean and secure.
High Power
8 To 4 Ohms
Standard Power
4 To 2 Ohms
HTR-2400
Theater Amp
Impedance
Switch
HTR-2400
Chassis
Left Side
The HTR-2400 features a Theater Amplifier Impedance Switch
located on the left side of the chassis. In the up position, you
will get more power but the amplifier is only stable to 4 Ohms.
In the down position, the amplifier is stable to 2 Ohms.
Содержание HTR-2400
Страница 2: ......
