Actidata actiLib Autoloader 2U, Руководство пользователя и обслуживания

Страница: 67 / 84

Media
Cleaning or data cartridge
incompatible with drive. Make sure you are using data and cleaning cartridges that are
compatible with the drive and model of your library. The library
automatically unloads incompatible cartridges, the Media Attention LED
flashes, and an exclamation mark (!) is displayed in the inventory display
for the indicated slot number.
Export the media in order to clear the state.
Cannot write to or read
from tape.

Make sure that the cartridge is write enabled (move the write-protect
switch to the enabled position).


Make sure you have the appropriate data cartridge for your library
model.


Make sure you are using an Ultrium cartridge that has not been
degaussed. Do not degauss Ultrium cartridges.


Make sure that the cartridge has not been exposed to harsh
environmental or electrical conditions and is not physically damaged
in any way.


Many backup applications do not read or write to cartridges that
were created using a different backup application. In this case, you
may have to perform an erase, format, or label operation on the
cartridge.


Make sure you understand any data protection or overwrite
protection schemes that your backup application may be using,
which could prevent you from writing to a given cartridge.


Retry the operation with a different, known good tape.


Clean the tape drive. See ”
Cleaning the tape drive
” on page 57.

Cleaning
Cannot load the cleaning
cartridge

Make sure you are using an Ultrium universal cleaning cartridge.
(See”
Cleaning the tape drive
” on page 57.)


Contact your service representative.

Errors Displayed on Front Panel
“!” in library operator panel
inventory display
See ”
Operator control panel (OCP) overview
” on page 44 for more
information.
There is an error code on
the LCD Look up the error code, try to resolve the failure, and power cycle (see
”
Tape library error codes
” on page 74).
SCSI ID
Changed drive SCSI ID, but
the host server does not
recognize the new ID

Make sure that all SCSI devices on the same bus have unique ID
numbers.


If the SCSI bus is narrow (50-pin) only SCSI IDs 0 through 7 are
available.


Make sure that you cycle power on the library after changing the
SCSI ID.


Reboot the host server. Tape library Performance The library is not
efficiently backing up data.

 