Actidata actiLib Autoloader 2U, Руководство пользователя и обслуживания

Страница: 15 / 84

4.5.2
Operator control panel buttons
The Operator panel consists of an LCD display with a 128 x 64 character matrix, 4 push button
switches
and a power on/off button. The circuitry to illuminate external LED’s has also been
incorporated into the current level of hardware.
Figure 2 LED
’s
Table 2 LED descriptions
Number LED Color Description
1
Ready
(Activity) Green
Illuminated when power is on. Blinking when there is tape or library
robotics activity.
2 Clean
(Drive) Amber Illuminated when the tape drive has determined that a cleaning cartridge
should be used. Cleaning is only necessary when the library directs you
to do so. Additional cleaning is not necessary.
3 Attention
(Media) Amber Illuminated if the library has detected a condition that requires attention
by the operator.
4 Error Amber
Illuminated if an unrecoverable tape drive or library error occurs. A
corresponding error message displays on the LCD screen (see for more
information).

OCP display, consisting of 128 x 64 characters
The OCP screen displays actions and status information, menu items or error messages
equivalent to the operation mode.

READY/ACTIVITY , Green LED
The READY/ACTIVITY LED is lit any time the unit is powered on and able to function. It will blink
whenever there is library or drive activity.

CLEAN DRIVE , Amber LED
The CLEAN DRIVE LED will be lit when the drive is to be cleaned. The LED will be turned off after
the tape drive is cleaned successfully.

MEDIA ATTENTION , Amber LED
The MEDIA ATTENTION LED will be lit when there has been a failure that indicates that there is a
piece of media that is bad, marginal or invalid. It will be cleared when all invalid cartridges have
been exported from the tape library.

ERROR , Amber LED
The ERROR LED will be lit when there is an unrecoverable library or drive failure. A message is
displayed at the same time on the screen. It will be cleared when the error state is resolved.