Actidata actiLib Autoloader 2U, Руководство пользователя и обслуживания

Страница: 22 / 84

4.6.5
Rackmounting the library
The library easily installs into a standard 19” rack system taking up 2U of space.
WARNING! The actiLib Library 2U weighs 15.6 kg without media.
To reduce the risk of personal injury or damage to the library:
1) observe local health and safety requirements and guidelines for manual material
handling,
2) obtain adequate assistance to lift and stabilize the library during installation or removal,
3) always remove all tapes to reduce the overall weight of the library.
Required tools:
1. #3 Phillips screwdriver
2. T10 Torx screwdriver (included in your shipment)
There are two sets of eight M6 screws in the accessory package that came with your library. The type
of rack that you have will determine the type of M6 screw that you will use.
To install the library:
1. Determine the location in you rack for your library to be installed and, using a pencil, mark
the location on each vertical rail in you rack.
2. Using the screws for your rack type, and a #3 Phillips screwdriver, secure one rail to each
side of the rack in your chosen rack location. Secure both the front and back of each rail to
the rack. The rails extend to fit a variety of rack depths. The correct orientation of the left
and right rails is shown in Figure 10.
Figure 10 Installing the rails into the rack