Acer Altos R700 Series, Руководство по эксплуатации продукта

Страница: 68 / 80

4 Working Inside Your Server
60
10 Remove the fan blank from the fan module.
11 Connect the new fan’s cable to the connector on the fan module.
12 Insert the top of a new fan into the fan module and rotate the
bottom in until tab (B) locks it in place.
13 Align the holes in the fan module with the raised tabs on the
chassis and lower the fan module onto the chassis floor.
14 Slide the fan module toward the chassis sidewall until it has locked
in place.
15 Plug the fan cables into the server board system fan connectors.
16 Make sure the USB cable is routed along the top of the fan
module.
17 Connect the flex circuit cable to the backplane.
18 Install the flex circuit cable retention clip.
19 Install the full-height PCI riser card.
AR700-e.book Page 60 Tuesday, September 10, 2002 2:31 PM