WinCEGeräte_Handbuch_Administration_v2 00_en
25 / 84
2.4.3 Internal scanner (ScanDrv scanner driver)
To open ScanDrv, boot the device.
The program immediately takes control of the integrated scanner module and configures the module with the
settings in the default configuration file \Flashdisk\System\Ini\ScanDrv.ini.
Press the left or right-hand scanner key to start scanning. Another key on the keyboard is often configured
as a scanner key that can also be used to launch the scanner.
.
ATTENTION
In the default setting, the scanned barcodes are inserted into the device keyboard.
The ScanDrv configuration must be changed to allow customised applications to use the
scanner API or other types of use.
This applies to all types of modifications to the default settings.
2.4.3.1 Running the ScanDrv configuration tool
The two most important ways to open the ScanDrv configuration tool:
Open the control panel from
Start / Settings / Control Panel
Double-tap the barcode icon in the Control Panel to launch
the configuration tool.
Tap the bottom of the display. The status bar (with battery
icon and clock) is hidden by the task bar.
Double-tap the barcode icon in the task bar to launch the
configuration tool.
Other ways to start the configuration tool is either from Start / Programs / ACD / System / Configure ScanDrv
or by launching the program directly:
ScanDrv.exe -config
