Accom ASWR8150, Техническое руководство

Страница: 219 / 236

the background video, which you can select on the Keyer 2
Fill bus row.
STEP 10: To change the background video, select a different source on
the Keyer 2 Fill bus. To change the video "inside" the DVE,
select a different source on the Background A bus, or move
the fader bar to transition to the Background B source. Note
that the DSK is still available for use.
STEP 11: If the Aux 3 and 4 option is installed in the 8150, you can use
these outputs to feed another DVE, called
EXT 2
in the
Effects
Loop Inputs softkeys in the Miscellaneous Aux Buses
submenu.
STEP 12: You can set up and check a second DVE for effects looping
by toggling the
Effects Loop Inputs
selection to
DVE 2
and
repeating steps 1 through 10. If the two DVEs feed a video
combiner before re-entry to the 8150, set the
DVE 1 inputs to
correspond to the video combiner output connections, and
leave the
DVE 2
settings at 0.
8150 Technical Guide Effects Loop Processing
9100-0212-04 - May 2000
Engineering Setup
5-83