Accom ASWR8150, Техническое руководство

Страница: 142 / 236

have a different delay than the Aux 3 and 4 outputs.
Combiner On
forces
all four Aux outputs, and therefore both Aux Ref outputs, to the timing
of the Aux outputs used in a DVE Effects Loop. See the discussion later
in this section for a step-by-step description of setting up an Effects Loop.
NOTE: Combiner On mode only works correctly if the
output delay of Aux 1 and 2 is set to Auto (see the Output
submenu discussion later in this section). If the Aux 1 and
2 output delay is set to 1 Frame when Combiner On mode
is active, there may be timing errors on the Aux 3 and 4
outputs because they cannot be delayed by one frame.
Setup Inputs
The Serial Digital and Parallel Digital Input modules each include matte
(color field) generators so that you can create extra color mattes and use
them as border fills or key fills. The component analog inputs do not
have built-in matte generators, and this softkey does not appear when
you select an input at which a Component Analog module is installed.
The
Input Number pushknob scrolls through the 16 inputs.
With Video selected for the input, the active video input is passed to the
system. Toggling the softkey selects the Matte color field, which makes
the matte generator the source for that input. The matte generators are
limited to RGB-legal colors.
Keypad
Engineering Menu
Figure 5-3 The Input Submenu - Input Matte Generator
Engineering Menu 8150 Technical Guide
5-6
Engineering Setup
9100-0212-04 - May 2000