MC97F2664
April 11, 2014 Ver. 1.4
165
11.10 UART2/3/4
11.10.1 Overview
The universal asynchronous serial receiver and transmitter (UART2/3/4) is a highly flexible serial communication
device. The main features are listed below.
- Full Duplex Operation (Independent Serial Receive and Transmit Registers)
- Baud Rate Generator
- Supports Serial Frames with 5, 6, 7, 8, or 9 Data Bits and 1 or 2 Stop Bits
- Odd or Even Parity Generation and Parity Check Supported by Hardware
- Data OverRun Detection
- Framing Error Detection
- Three Separate Interrupts on TX Complete, TX Data Register Empty and RX Complete
UART2/3/4 has baud rate generator, transmitter and receiver. The baud rate generator for asynchronous
operation. The Transmitter consists of a single write buffer, a serial shift register, parity generator and control
logic for handling different serial frame formats.
The write buffer allows continuous transfer of data without any
delay between frames. The receiver is the most complex part of the UART2/3/4 module due to its clock and data
recovery units. The recovery unit is used for asynchronous data reception. In addition to the recovery unit, the
receiver includes a parity checker, a shift register, a two-level receive FIFOn (UARTnDR) and control logic. The
receiver supports the same frame formats as the transmitter and can detect frame error, data overrun and parity
errors.
Содержание MC97F2664
Страница 20: ...MC97F2664 20 April 11 2014 Ver 1 4 4 Package Diagram Figure 4 1 64 Pin LQFP 1010 Package...
Страница 21: ...MC97F2664 April 11 2014 Ver 1 4 21 Figure 4 2 64 Pin LQFP 1414 Package...
Страница 22: ...MC97F2664 22 April 11 2014 Ver 1 4 Figure 4 3 64 Pin QFN Package...
Страница 23: ...MC97F2664 April 11 2014 Ver 1 4 23 Figure 4 4 44 Pin MQFP 1010 Package...