Ableton Push, Руководство пользователя

Страница: 15 / 193

using the encoders above each pedal entry in the display.
Each Pedal jack is stereo and can be used with a male TRS to dual
female TS splitter cable to access a total of four CV outputs. Some
ADAT extenders can also be used with CV.
The voltage range is 0-10 V, the effective resolution is 12 bits, and the
frequency range is DC-20kHz.
When using CV, Pedal 1 represents outputs 5 and 6 on Push, while
Pedal 2 represents outputs 7 and 8.
2.2.7 Wi-Fi Tab
The Wi-Fi Tab.
In the Wi-Fi tab you can connect to a Wi-Fi network, which lets you
enable Link and download Packs and Push software updates without a
computer, as well as transfer files between Push and a computer.
You can use the upper display button on the left to toggle Wi-Fi on or
off. When on, a list of available Wi-Fi networks is shown, and you can
use the first encoder to select one. Press the Connect display button to
make the connection. You will then be prompted to enter the Wi-Fi
password.
You can navigate through the available text characters using the jog
wheel or Session D-pad. Press the jog wheel or the center button of the
7/29/23, 9 : 32 AM
Page 15 of 193