ABB REU 610, Техническое справочное руководство

Страница: 98 / 140

Table 5.1.17.-7 Control parameters (Continued)
Description Parameter R, W, P Value
Optional communication module V206 R, W (P) 0 = Not in use
1 = In use
c)
HMI language set information V226 R 00...99
CPU software number V227 R 1MRS118513
CPU software revision V228 R A...Z
CPU build number V229 R XXX
DNP protocol name 2V226 R DNP 3.0
DNP software number 2V227 R 1MRS118531
DNP software revision 2V228 R A...Z
DNP build number 2V229 R XXX
Relay serial number V230 R BAxxxxxx
CPU serial number V231 R ACxxxxxx
DNP serial number V232 R AKxxxxxx
Test date V235 R YYMMDD
Date reading and setting V250 R, W YY-MM-DD
Time reading and setting V251 R, W HH.MM;SS.sss
a)
In case of a warning, the value 255 is stored in V169. This enables the master to continuously read only V169.
b)
If the optional DNP 3.0 module has been installed, the DNP 3.0 communication protocol is automatically selected.
c)
If the optional communication module is not installed, a warning of a faulty communication module appears on the LCD together with
the fault code.
The measured voltages can be read with parameters
I1
...
I4
, the positive
phase-sequence voltage with parameter
I5
, the negative phase-sequence
voltage with parameter
I6
and the status of the digital inputs with parameters
I7...I11
.
Table 5.1.17.-8 Input signals
Description Parameter (R),
channel 0
Value
Measured phase-to-phase voltage U
ab
I1 0...2 × U
n
(VT)
Measured phase-to-phase voltage U
bc
I2 0...2 × U
n
(VT)
Measured phase-to-phase voltage U
ca
I3 0...2
×
U
n
(VT)
Measured phase-to-phase voltage U
n
I4 0...200% U
n
(VT)
Calculated positive phase-sequence
voltage I5 0...2 × U
n
(VT)
Calculated negative phase-sequence
voltage I6 0...2
×
U
n
(VT)
DI1 status I7 0/1
a)
DI2 status I8 0/1
a)
DI3 status I9 0/1
a)b)
DI4 status I10 0/1
a)b)
DI5 status I11 0/1
a)b)
98
REU 610
Voltage Relay
Technical Reference Manual - ANSI Version
1MRS755972