1MRS 752264-MUM
Motor Protection Relay
Operator’s Manual
REM 610
15
By pressing
before confirming the selection, the former language will remain
active and the display will be returned to the view mode. Pressing
again will
return the display to the idle mode.
Fig. 3.1.8.-1
Selecting language
Note!
The list of languages in the language selection menu differs depending on the HMI
language set number in the order number.
3.1.9.
How to set the real-time clock
The real-time clock used for time-stamped events is set via two different settings,
one for Year-Month-Day and another for Hours-Minutes-Seconds. To change one
or both settings:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select
CONFIGURATION\TIME
and press
.
3. Use
or
to select the parameter to be edited.
4. Press
to enter the setting mode and give the password if required. If the
default password 999 is still valid, no password will be required.
5. The first digit of the setting value of the parameter to be edited will start to flash.
Use
and
to move the cursor and
and
to increase or decrease the
value. The setting range (e.g. Year or Minutes) is shown on the right-hand side
of the second line of the display.
6. To store a new value and return the display to the view mode, press
.
7. To exit the setting mode without storing the changes, press
once before
confirming and the display will be returned to the view mode.
8. Press
to return the display to the idle mode.
LanguageREM610_b
TRIP CIRCUIT SUP
Main Menu
Group Menu
Parameter Menu
Confirm
Cancel
SETTINGS
CONFIGURATION
MEASUREMENTS
RECORDED DATA
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
FREQUENCY
CONFIGURATION
CONFIGURATION
MEMORY SETTINGS
PASSWORD HMI
TIME
RTD INPUTS
INFO
ENGLISH
SVENSKA
SUOMI