1MRS 752264-MUM
Motor Protection Relay
Operator’s Manual
REM 610
17
Fig. 3.1.10.-1
Switching between front and rear connection
3.1.10.1.
Indicator LED for front communication
• Indicator off:
Rear communication is currently selected
• Lit indicator:
Front communication port is currently selected
• Blinking indicator:
Front communication port is currently selected and the relay is communicating
3.1.11.
How to select the protocol for rear communication
REM 610 allows you to choose the communication protocol for rear connection. The
selected protocol is stored in the non-volatile memory and will therefore be activated
automatically after an interruption in the auxiliary voltage.
Select the rear communication protocol as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select
CONFIGURATION\COMMUNICATION\REAR
PROTOCOL
and press
. The cursor will be at the setting currently in use (e.g.
SPA
).
3. Press
to enter the setting mode. The second line will start to flash.
4. Use
or
to select the desired setting.
5. Press
to confirm the selection.
6. Press
to return the display to the idle mode.
FrontRearREM610_b
Main Menu
Group Menu
Parameter Menu
SETTINGS
CONFIGURATION
MEASUREMENTS
RECORDED DATA
INFO
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
FREQUENCY
CONFIGURATION
MEMORY SETTINGS
PASSWORD HMI
TIME
LINE-IDLE STATE
CONNECTION TYPE
COUNTER :xxx
UNIT ADDRESS :xxx
MODBUS SETTINGS
SPA SETTINGS
REAR PROTOCOL
REAR CONNECTION
CONFIGURATION
IEC103 SETTINGS
FRONT CONNECTION
REAR CONNECTION
CONFIGURATION
Confirm
Cancel
RTD INPUTS
TRIP CIRCUIT SUP
REAR COM. MODULE
