ABB PVI-3.0-TL-OUTD-S-US, Руководство по эксплуатации продукта

Страница: 42 / 75

- 42 -
C010CC4
4 - Operations
Parameter Definition Default
Value
Adjustable
Ranges
DISABLE U>
(10 min)
Provides ability to enable/disable the
parameter
“SET U>(10 min)”
Disable Disable or En-
able
Disable U< Provides ability to enable/disable the In-
termediate Under Voltage Set point U<
Enable Disable or En-
able
Disable F> Provides ability to enable/disable the In-
termediate Over Frequency Set point F>
Enable Disable or En-
able
Disable F< Provides ability to enable/disable the In-
termediate Under Frequency Set point F<
Enable Disable or En-
able
U>(10 min)
Der.
Provides ability to limit the power for 10
minutes due to the high average voltage
value set by the parameter “SET U>(10
min)”
Disable Disable or En-
able
Slow Ramp Provides ability to slowly ramp the Output
Power at connection( Soft start)
Disable Disable or En-
able
OF Derating Provides ability to limit the Output Power
due to the high grid frequency
Disable Disable or En-
able
Reset Country
S
Provides ability to reset the country code Not Appli-
cable
Not Applicable
New PW - Used to change the password for accessing the SETTINGS menu. The default
password is 0000 and can be changed using the display keyboard.
• Use ENTER to scroll the digits (from left to right)
• Use ESC to return to the previous digit (from right to left)
• Press ESC several times to return to the previous menus
• Use DOWN to progressively scroll the numerical scale downwards (from 9 to 0)
Be careful to memorize the new password. For security purposes there is no reset function.
If the password is misplaced it will not be possible to access the inverter.
Cash - Used to set the name of the currency and the value given to 1 kWh of energy
produced. The correct setting of these parameters displays the actual earning/saving given
by the system.
• Name: the chosen value is set (default is $, USD).
• Val/KWh: indicates the cost/incentive of 1 KWh expressed in the chosen currency (default
is 0.16).
Time – Used to set the current date and time (daylight saving time not included).
Language
– Used to set the menu language.
Vstart – Used to set the Vstart voltage (separately for both channels if they are configured in
independent mode). Change the activation voltage only if necessary. A configuration program
that can help to correctly size the photovoltaic system is available on the website.