ABB PVI-3.0-TL-OUTD-S-US, Руководство по эксплуатации продукта

Страница: 33 / 75

- 33 -
C009CH4
M
onitoring and data transmission
One of the first rules for preventing damage to the equipment and injury to the operator is to have a
thorough knowledge of the user interface operations.
ABB cannot be held responsible for damage to the equipment or the operator if caused by
incompetence, insufficient qualifications or lack of training.
Normally, the inverter operates automatically and does not require manual intervention. When there is not
enough sunlight to supply power for export to the grid, (e.g. during the night) it disconnects automatically and
goes into stand-by mode.
The operating cycle is automatically restored when there is sufficient sunlight. At this point, the lights on the
LED panel will indicate this state.
T
ypes of data available
The inverter provides two types of data which are accessed through the appropriate interface
software and/or the LCD.
Real-time operating data
Real-time operating data can be transmitted on request through the communication lines
and are not recorded in the inverter. For data transmission to a computer, download the free
Aurora Manager Lite software from the website.
Internally stored data
The inverter internally stores a set of data that is necessary for processing statistical data
which includes an error log with time stamps.
U
ser interface
The inverter is able to provide operation information through the following:
• Warning lights (LEDs).
• Liquid Crystal Display (LCD) for displaying operating data.
• Data transmission on dedicated RS-485 serial line. The data can be collected by a PC (using the signal
converter PVI-USB-RS485_232) or a data logger equipped with an RS-485 port (PVI-DESKTOP). Contact
customer service with any questions regarding the compatibility of the devices.
4
Operations