ABB PVI-3.0-TL-OUTD-S-US, Руководство по эксплуатации продукта, Страница: 36 / 75

- 36 -
C010CC4
4 - Operations
C
yclical display of general information
The two line display area consists of 2 lines with 16 characters per line. When moving
through the menu using the buttons of the keypad, the display is used to:
• display the operating state of the inverter and the statistical data
• display the service messages for the operator
• display the alarm and fault messages for the operator
• navigate the menus
Pressing the ESC button allows access to the three main menus, STATISTICS, SETTINGS
and INFORMATION. ESC is also used to cancel an entry or return to the previous menus.
The UP and DOWN buttons of the keypad are used to move through a menu and change
menu settings by increasing or decreasing the settable values.
The ENTER button is used to open the menu choices, make a selection and confirm a change
in adjustable values.
During regular operation the display will
cycle through general information shown
at right.
Cycling is indicated by two arrows in the
top right corner of display area b7 .
Scrolling can be stopped by pressing the
ENTER button until the padlock symbol
appears.
When locked, the current information
displayed will remain on screen
Press and hold the ENTER button until
the arrows are displayed to unlock and
cycle through the display.
The three main menus that enable monitoring of the inverter’s operations are outlined and
described on the following pages. Press the ESC button to access the menus from the
general information screens. Use the UP and DOWN keys to scroll through the three menus
and press ENTER to make a selection.