ABB PVI-3.0-TL-OUTD-S-US, Руководство по эксплуатации продукта

Страница: 13 / 75

- 13 -
3004CH2
T
ransportation and handling
Transportation of the equipment, especially by road, must be carried out by suitable ways and means for
protecting the components (in particular, the electronic components) from violent shocks, humidity, vibration,
etc. During handling, do not make any sudden or fast movements that can create dangerous swinging.
L
ifting
ABB packages and protects individual components using suitable means to make their trans-
port and subsequent handling easier. Due to the weight and complexity of this equipment,
ABB recommends the process of loading and unloading of this equipment be done by an
experienced or specialized staff knowledgeable in material handling. Where indicated or
where there is a provision, eyebolts or handles can be inserted and used as lifting points. Do
not lift several units or parts of the equipment at the same time, unless otherwise indicated.
I
ncoming inspection
It is the customer’s responsibility to examine the condition of the unit. Upon receipt of the
inverter, please check the following:
• Inspect the shipping container for any external damage.
• Inventory the contents against the table below and verify receipt of all items.
• Use care not to discard any equipment, parts, or manuals.
• Call the delivering carrier if damage or shortage is detected.
QTY Description QTY Description
1
1
1
1
Inverter
Inverter mounting plate
Quick installation guide
Terms and conditions
1 Bag containing hardware:
4 6.3 x 70 screws
4 S x 10 wall plugs
1 Red Cable AWG 10
1 Black Cable AWG 10
1 6 x 10mm machine screw
5 6mm flat washer
1 Torx 20 wrench
2
Installation location