88 Technical data
RS-485 link
Mounting
Into the option slot of the drive
Degree of protection
IP20
Ambient conditions
The applicable ambient conditions specified for the
drive in its manuals are in effect.
Indicators
Three LEDs (HOST, MODULE, NETWORK)
Connectors
20-pin connector to the drive
4-pin detachable screw connector to the bus
6-pin jumper block 2 for bus termination
configuration
Power supply
+3.3 V
±
5% max. 400 mA (supplied by the drive)
General
Complies with EMC standard EN 61800-3:2004
Bus interface functionally isolated from the drive
Printed circuit board conformal coated
Compatible devices
All RS-485 compliant devices
Medium
Shielded twisted pair cable, impedance
100…150 ohm
• Termination: 120 ohms (built in the module)
Topology
Trunk line, drop lines allowed
Transfer rate
9.6, 19.2, 38.4, 57.6, or 115.2 kbit/s
Serial communication
type
Asynchronous, half-duplex RS-485
Protocol
Modbus/RTU
Содержание FSCA-01
