ABB Distribution Protection Unit 1500R
12-10
Ordering Information/Communications/Panel Mounting/Spare Parts
9/99
website:www.abb.com/papd
Select Communication Options Table
An empty selection box indicates communication port is either not provided or is disabled.
* Main board jumper selectable front or rear.
The table below illustrates all possible hardware configurations for the communication ports and the supported protocols.
The Catalog Number Select Option columns list every communication option for which the relays can be configured.
The different protocol variations are outlined under the corresponding communication ports that support them. Select
the row containing the protocol combination that best suits your communications requirements and use the corresponding
catalog number options to fill in the brackets [ ] of the catalog number.
The auxiliary port labelled IRIG-B receives a demodulated IRIG-B signal for 1500R clock synchronization purposes.
For example, if your system requires DNP 3.0 (IEC870-5) protocol, the ordering catalog number would be 577R041[2]-
6101[1] (4th row), or 577R041[4]-6101[1](10th row) based on your choice for the second port provided.
577R041[ ] - 6101[ ]
2
4
2
1
DNP 3.0
Catalog Number
0
1
0
0
ABB Ten Byte
Select Option
3
4
4
5
0
1
4
0
INCOM
INCOM
INCOM
Modbus
DNP 3.0
IRIG-B
IRIG-B
IRIG-B
DNP 3.0
Modbus
Modbus
With
Display
Without
Display*
®
®
®
COM 3
COM 2
COM 1
REAR PORT ASSIGNMENTS
IRI G- B
57
56
55
58
60
59
AUX.
PORTS
61
62
64
63
RS-485
NON
RS-232
NON
IN COM
ISOL A T ED
RS-232
unless
noted
ISOLATED
ISOLATED
ISOLATED
ISOLATED
RS-232
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
or ABB Ten Byte