manualshive.com logo in svg

ABB DPU 1500R, Инструкция

ABB DPU 1500R - Инструкция по эксплуатации, бесплатное скачивание на manualshive.com. Руководство пользователя позволяет быстро и легко понять особенности работы данного устройства. Скачайте руководство сейчас, чтобы использовать ABB DPU 1500R на полную мощность!

Поделиться
Скачать
background image

ABB Distribution Protection Unit 1500R

11-14

Maintenance and Testing

9/99

website:www.abb.com/papd

3.

Download all settings groups, each in turn, to the pc hard drive or a floppy disk.

4.

Consider reviewing and saving the information contained in the various records, as these could be lost in the
updating process.

5.

In order to update the flash memory of the unit, the communication port and the pc must be set to 9600, 8, N, 1.
Review, and change your set-up if necessary.

6.

Insert the FPI disk into your computer’s floppy drive and copy to the hard drive.

7.

Remove the FPI disk from the drive, Insert the SAF disk that was selected in Step 2 and copy it to the hard
drive. Be sure to check file name (c:\dpuvx_xx.abs)

8.

Start the FPI program.

9.

At the Monitor Type ? prompt, select appropriate choice and press <Enter>. Press <Enter> again to start.

10. At the Communications Options screen, install the correct settings. Press <Enter>.  If all communications settings

are correct, the Successful Connection To....  screen appears.  Press <Enter> to continue.  The next screen to
appear should be the Main Menu.  (If any communications problem exists, the Communications  Status screen
appears.  If this happens, reset the comm settings and recheck your  communications cable connections.  Then
press <Enter>.)

11. From the Main Menu screen, select “Update Unit Software” and press <Enter>.

12. At the Warning screen, select “Continue with Unit Software Update” and press  <Enter>.

13. At the Load New Firmware Data screen, type in the correct file name, press  <Enter>.  This will highlight the

default action, [Read from Disk].  Press  <Enter> again.

14. Downloading should begin, and take about 30 minutes to complete.  During the process the Target LED’s on the

front panel of the relay will blink intermittently and in sequence per the following:

Computer display

Relay LED’s

MMI if present

Monitor Has Been Entered

Phase A (L1) blinks

DPU1500R Monitor

Flash Erase

Phase B (L2) blinks

Flash Memory Erase in Progress

Flash Programming

Phase C (L3) blinks

Flash Memory Download in Progress

15. When complete, the message “Successfully Completed Downloading!  Hit Any Key To Return To Main Menu”

will appear.

16. Press <Enter>.  This will cause the systems to reboot and the message “Please Wait While System Reboots”.

Then the Main Menu will reappear.  Select  Quit Program and press <Enter>.

17. Load the External Communications Program and establish communications with the relay.
18. Restore all original settings and counters, and verify before placing the relay back in service.

Recovery from Download Failure in Surface Mount Units

Should the downloading process fail you will see an error message.  The following procedure can be implemented

to retry the downloading:
A. Press the System Reset relay on the front panel of the relay.

B. If the “Fail” and “C” LED’s are on and the “B” LED is flashing,  go to step C.  If the “A” LED is on, then

remove control power from the relay for at least 10 seconds. Then reapply control power.  If the “Fail” and
“C” LED’s are now on, and the “B” LED is flashing,  then go to step C.

C. Continue using the FPI program through the front port of the relay.  Go back to the beginning of the

program and try to establish communication.  You will get  “comm error - default settings will be shown”.  Hit
Enter.

D. The “comm status” screen is displayed.

                 Do Not select  “Re-try to Connect”

                 Do Not select  “Exit - return to DOS”

Содержание DPU 1500R





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DPU 1500R

Avocent Cyclades PM3000 Brochure preview
Cyclades PM3000
Бренд: Avocent Страницы: 2
Whisper Power WBI-VG 200 Installation And User Manual preview
WBI-VG 200
Бренд: Whisper Power Страницы: 4
Siemens 5SD7 581-3 Operating Instructions preview
5SD7 581-3
Бренд: Siemens Страницы: 3
Siemens 5SD7 581-2 Operating Instructions preview
5SD7 581-2
Бренд: Siemens Страницы: 3
Siemens 7SG14 Duobias-M-200 Technical Manual preview
7SG14 Duobias-M-200
Бренд: Siemens Страницы: 20
Siemens 11-C-9100-01 Instruction & Installation Manual preview
11-C-9100-01
Бренд: Siemens Страницы: 29
Siemens 81000 90H35 Instructions Manual preview
81000 90H35
Бренд: Siemens Страницы: 32
Siemens Arcteq AQ01 Instruction Manual preview
Arcteq AQ01
Бренд: Siemens Страницы: 48
Siemens SDV7 Instruction Manual preview
SDV7
Бренд: Siemens Страницы: 56
Siemens SIPROTEC 7XR8004 Manual preview
SIPROTEC 7XR8004
Бренд: Siemens Страницы: 70
Siemens SIPROTEC 7SJ46 Manual preview
SIPROTEC 7SJ46
Бренд: Siemens Страницы: 77
Siemens SIPROTEC 7SC805 Manual preview
SIPROTEC 7SC805
Бренд: Siemens Страницы: 158
Siemens 8PQ9801-8AA54 Manual preview
8PQ9801-8AA54
Бренд: Siemens Страницы: 160
Siemens SIPROTEC 7RW600 Instruction Manual preview
SIPROTEC 7RW600
Бренд: Siemens Страницы: 168
Siemens SIPROTEC 4 7VE61 Manual preview
SIPROTEC 4 7VE61
Бренд: Siemens Страницы: 330
Siemens SIPROTEC 7ST6 Manual preview
SIPROTEC 7ST6
Бренд: Siemens Страницы: 356
Siemens SIPROTEC 4 7SD80 Manual preview
SIPROTEC 4 7SD80
Бренд: Siemens Страницы: 416
Siemens SIPROTEC 5 Manual preview
SIPROTEC 5
Бренд: Siemens Страницы: 490

Бренды по названию

Популярные бренды

Загрузить еще бренды