ABB CRB 15000 Скачать руководство пользователя страница 841

Страница: 841 / 1096

Note

Action

xx2300000796

Secure with four attachment screws and pre-
tighten the screws crosswise.

xx2300000797

Remove the lifting aid by removing the screws.

Hex socket head cap screw:
3HAB3409-20

Secure the joint unit with the remaining attach-
ment screws.

xx2300000798

M5x55 12.9 Lafre 2C2B/FC6.9, 12
pcs

Torque tighten all screws crosswise.

Tightening torque: 8.2 Nm.

Securing the base (-10/1.52 and -12/1.27)

Note

Action

Attachment screws: M10x35 8.8 (4
pcs).

Lift the base to standing and secure it to the
foundation with the attachment screws and
washers.

Washers: 23/10.5/2.5 mm Steel (4 pcs).
Tightening torque: 32 Nm ±10%.
xxx

Continues on next page

Product manual - CRB 15000

841

3HAC077389-001 Revision: L

5 Repair

5.6.2 Replacing the axis-1 joint unit (CRB 15000-10/1.52 and CRB 15000-12/1.27)

Continued

Содержание CRB 15000







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CRB 15000

Отзывы:

ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 841 / 1096

Результаты поиска

Содержание CRB 15000

Отзывы: