ABB CRB 15000 Скачать руководство пользователя страница 147

Страница: 147 / 1096

For CRB 15000, required settings for communication between laser scanner,
PLC and OmniCore controller are predefined in the configuration file.

4 Set up safety user grants.

Users must have access grants to lock safety controller configurations, safety
services and software synchronization.

5 Configure robot properties.

6 Configure the synchronization position.

7 Configure the SafeMove tool definitions.

8 Configure safe I/O signals.

Note

For the first time configuring safe I/O signals using

Visual SafeMove

, make

sure the

I/O Engineering Tool

is opened first. In this case, the configured

safe I/O signals can be displayed in the

Visual SafeMove

window.

9 Configure zones and/or ranges.

10 Configure the supervision functions.

Tool Speed Supervision (TSP) and Stand Still Supervision (SST) must be
configured.

11 Configure other functions.

12 Load the configuration to the safety controller.

13 Restart the robot controller.

Detailed configuration procedures are specified in

Application manual - Functional

safety and SafeMove

With FlexPendant

1 Log in the FlexPendant.

The user logging in must have access grants to lock safety controller
configurations, safety services and software synchronization.

2 Tap

Settings

on the home page.

3 Tap

Safety Controller

4 Tap

Synchronization

in the left pane.

5 Jog the robot to match the

Actual Positions

values with the

Sync Positions

values. Make sure they are the same.

6 Tap

Synchronize

Product manual - CRB 15000

147

3HAC077389-001 Revision: L

3 Installation and commissioning

3.6.7.1 Configuration of one PROFINET-base laser scanner (RobotWare 7.5 or earlier)

Continued

Содержание CRB 15000







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CRB 15000

Отзывы:

ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 147 / 1096

Результаты поиска

Содержание CRB 15000

Отзывы: