ABB CRB 15000, Руководство по эксплуатации продукта, Страница: 709 / 1096

Note Action
Guide pin, M5x150: 3HAC087786-
001 Fit two guide pins to the swing. 3
Always use guide pins in pairs.
For joint units on axes 1 and 2 of
CRB 15000-10/1.52 and CRB
15000-12/1.27.
xx2300000791
Joint unit: 3HAC087472-001 Fit the lifting aid to the joint unit, aligning the pin
with the pin hole.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
4
Lifting aid: 3HAC087787-001
Screws: M5x30 (4 pcs for plate and
2 pcs for beam)
xx2300000778
xx2300000777
xx2300000776
Place the axis-1 cabling properly to avoid
squeezing by the joint unit when putting the joint
unit into the swing.
CAUTION
The cabling is sensitive to mechanical damage.
Handle it with care to avoid damage to the cabling
or the connector, avoid any kind of tilt or skew.
5
Continues on next page
Product manual - CRB 15000 709
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued